Discount applied at checkout
By Engine
By Engine
Filters
TA302A-TY03A
Engine: TOYOTA 1JZ-GTE, TOYOTA 2JZ-GTE
Model: TOYOTA 80 SUPRA, TOYOTA 100 CHASER, TOYOTA 100 MARK2
TB6080-NS05A
TI Exhaust front pipe made for the GT-R BNR32 / BCNR33 / BNR34 /
Cars equipped with RB26DETT engine
TB205A-NS08A
Engine: NISSAN SR20DE, NISSAN SR20DET
Model: NISSAN 13 SILVIA, NISSAN 14 SILVIA, NISSAN 15 SILVIA, NISSAN 180SX
For Drifting, circuit running and drag racing the higher G forces ( vertical and horizontal) will cause bad oil circulation due to the oil pickup not having adequate access to oil during cornering forces. This can cause engine failure if the lack of oil is a constant problem.
TB203A-NS05A
Engine: NISSAN RB26DETT, NISSAN RB25DE, NISSAN RB25DET, NISSAN RB20DE, NISSAN RB20DET, NISSAN RB25DE NEO6, NISSAN RB25DET NEO6
Model: NISSAN 32 GT-R, NISSAN 33 GT-R, NISSAN 34 GT-R, NISSAN 32 SKYLINE, NISSAN 33 SKYLINE, NISSAN 34 SKYLINE
Parts #: TA302A-NS08A
EngineNISSAN SR20DE, NISSAN SR20DET
Model: NISSAN 13 SILVIA, NISSAN 14 SILVIA, NISSAN 15 SILVIA, NISSAN 180SX
■ Super Lightweight DuraluminDuralumin was chosen for its lightweight properties and extra strength and durability. Both the outer and inner part is made from Duralumin to ensure that the product is the strongest available on the market
.■ Precision & PerfectionThe pulley and inner plate are made from billet aluminum. The pulley gear part has been designed and manufactured from precision methods to guarantee reliability with securing the drive from the timing belt.
■ Application Specific Design.The Intake and Exhaust cam pulley have been designed and manufactured individually so as when the pulley comes to the top it is easier to adjust the timing from TDC. (model specific)
■ Ultra Durable.The hard anodized surface coating greatly increases the durability of the pulley. The added strength will allow the pulley to guarantee reliability for drag racing cars that are running monster power engines that exceed 1,000 HP and used with engine speeds in excess of 10,000 RPM.
■ Performance Use & Showroom FinishThe Duralumin material with the hard anodized surface treatment gives it better operational reliability and will enhance the look of your engine bay for that showroom finish.
■ Simple Scales for AdjustmentsA simple scale was designed to help aid tuners anywhere are able to setup the settings on the scale to aid with easy setup process.
Procam SR20DET 272-12.50
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
Engine: NISSAN SR20DET
Model: NISSAN 14 SILVIA, NISSAN 15 SILVIA, NISSAN 180SX,NISSAN 13 SILVIA
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
Engine: NISSAN SR20DET
Model: NISSAN 13 SILVIA, NISSAN 180SX
PART #: TA302C-NS05A
Exhaust Cam Gear
ENGINE: NISSAN RB26DETT, RB25DE(T), RB25DE(T) NEO, RB20DE(T)
MODEL: NISSAN 32/33/34 GT-R, NISSAN 32/33/34 SKYLINE
■ Super Lightweight DuraluminDuralumin was chosen for its lightweight properties and extra strength and durability. Both the outer and inner part is made from Duralumin to ensure that the product is the strongest available on the market.
■ Precision & PerfectionThe pulley and inner plate are made from billet aluminum. The pulley gear part has been designed and manufactured from precision methods to guarantee reliability with securing the drive from the timing belt.
■ Application Specific Design.The Intake and Exhaust cam pulley have been designed and manufactured individually so as when the pulley comes to the top it is easier to adjust the timing from TDC. (model specific)
■ Ultra Durable.The hard anodized surface coating greatly increases the durability of the pulley. The added strength will allow the pulley to guarantee reliability for drag racing cars that are running monster power engines that exceed 1,000 HP and used with engine speeds in excess of 10,000 RPM.
■ Performance Use & Showroom FinishThe Duralumin material with the hard anodized surface treatment gives it better operational reliability and will enhance the look of your engine bay for that showroom finish.
■ Simple Scales for AdjustmentsA simple scale was designed to help aid tuners anywhere are able to setup the settings on the scale to aid with easy setup process.
Part # TA302B-NS05A
Intake Cam Gear
Engines: NISSAN RB26DETT, RB25DE(T) RB20DE(T), RB25DE(T) NEO
Models: NISSAN 32 GT-R, 33 GT-R, 34 GT-R, NISSAN 32 SKYLINE, 33, 34 SKYLINE
■ Super Lightweight DuraluminDuralumin was chosen for its lightweight properties and extra strength and durability. Both the outer and inner part is made from Duralumin to ensure that the product is the strongest available on the market.
■ Precision & PerfectionThe pulley and inner plate are made from billet aluminum. The pulley gear part has been designed and manufactured from precision methods to guarantee reliability with securing the drive from the timing belt.
■ Application Specific Design.The Intake and Exhaust cam pulley have been designed and manufactured individually so as when the pulley comes to the top it is easier to adjust the timing from TDC. (model specific)
■ Ultra Durable.The hard anodized surface coating greatly increases the durability of the pulley. The added strength will allow the pulley to guarantee reliability for drag racing cars that are running monster power engines that exceed 1,000 HP and used with engine speeds in excess of 10,000 RPM.
■ Performance Use & Showroom FinishThe Duralumin material with the hard anodized surface treatment gives it better operational reliability and will enhance the look of your engine bay for that showroom finish.
■ Simple Scales for Adjustments A simple scale was designed to help aid tuners anywhere are able to setup the settings on the scale to aid with easy setup process.
Multiple Sizes see below
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 34 GT-R
Multiple Sizes see below
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 32 GT-R, NISSAN 33 GT-R
parts #TA301A-NS05B (254-9.15)
TA301A-NS05D (262-9.15)
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 34 GT-R
parts # TA301A-NS05A (254-9.15)
TA301A-NS05C (262-9.15)
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 32 GT-R, NISSAN 33 GT-R
parts # TA301A-NS06C (254-9.15)
TA301A-NS06D (262-9.15)
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
engine: NISSAN RB25DET NEO
model: NISSAN 34 SKYLINE / R34 GT-T
parts # TA301A-NS06B
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB25DE, NISSAN RB25DET
MODEL: NISSAN 33 SKYLINE /R33 Late Model
parts #TA301A-NS06A
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
engine: NISSAN RB25DE, NISSAN RB25DET
model: NISSAN 33 SKYLINE
The TOMEI RB25DE(T) PROCAM for R33 is incompatible with Nissan OEM NVCS cam gear.
When installing the TOMEI PROCAM on an engine, please replace the OEM cam gear to TOMEI adjustable cam gear (TA302B-NS05A) for the intake side. In addition, 4 pcs of OEM cam gear bolts (13012-D420A) and a lock washer (13030-D420A) are required when installing the TOMEI PROCAM.
parts #TA301B-NS06B
Drop in Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB25DE, NISSAN RB25DET
MODEL: NISSAN 33 SKYLINE /R33 Early Model
parts #TA301B-NS06A
Drop in Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB25DE, NISSAN RB25DET
MODEL: NISSAN 33 SKYLINE /R33 Early Model
parts #TA301A-NS07A
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE:NISSAN RB20DE, NISSAN RB20DET
MODEL: R31/R32,LAUREL C34
parts #TA301B-NS07A
Drop in Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB20DE, NISSAN RB20DET
MODEL: NISSAN R31/R32,LAUREL C34
SKU 237-4000
Suitable applications (Manual Transmission only) for 237-4000 automotive computer unit:
Honda Integra Type R DC5 2002-2004 with K20A/K20A2/K20A3 Engine
Acura RSX 2002-2004 with K20A/K20A2/K20A3 Engine
Honda Civic Type R EP3 2001-2005 with K20A Engine
Honda Civic Si/SiR 2001-2005 with K20A3
Honda Civic DX/LX/HX 2001-2005 with D17A1/A2/A3 Engine
Honda CR-V 2002-2004 with K24A1 Engine
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the K20A engine.
· Please check your connector matches the header in the listed photo before purchasing.
· This ECU works for manual transmissions only.
· ECU includes an onboard 7 bar MAP sensor.
· Most factory features are supported.
· Check the features tab for I/O input & output expansion options
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
SKU 205-4000
Suitable Applications for 205-4000 automotive control unit:
1992-1995 Gen 5 Honda Civic DX/LX/EX/Si
ACURA: 92-95 Integra RS/LS/GS/GS-R
HONDA: 90-95 Accord DX/LX/EX
93-95 Del Sol S/Si, 94-95 Del Sol VTEC
90-91 Prelude Si & 92-95 Prelude S/SE/Si/VTEC
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation of the data processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the 1992-1995 Honda B16 and B18 engine. All models that use the Honda “OBD1” ECU.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
No onboard MAP sensor.
Knock control is not available on this ECU.
Most factory features are supported.
Check the features tab for I/O input & output expansion options.
This ECU will need a modification before E-Throttle is usable.
The following expansion connector inputs/outputs are provided:
Gnd Sensor Ground Only
+5V Out Low Current +5V Supply
An Volt 4 Analog 0-5V input
An Volt 5 Analog 0-5V input
An Volt 6 Analog 0-5V input
Aux 8 Auxiliary output (0.5A current MAX)
DI 6 Digital Input
An Temp 3 Temperature sensor input
Download Manual
Click here
SKU 232-4000
Suitable applications:
JZX100 with 1JZ VVTi engine
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the 1JZ VVTi engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
ECU includes an onboard 7 bar MAP sensor.
Most factory features are supported.
Check additional info below for I/O expansion options
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"
Download Manual
Click here
R32 ABS Delete only
Made to order
Catch can made to fit your chassis and setup. Designed to fit the R32 chassis with ABS delete. Baffled catch can made out of aluminum and larger than most cans on the market. Catch can breathes through the slots in our logo plate. 4 Allen head bolts secure the logo plate hiding the E85 resistant foam. Making maintenance easy and accessible. Drain on the bottom for ease of service.
Powder coat options available upon request
Quality -AN fittings and lines available upon request
Available in -10AN or -12AN variations
*select from size options below
SKU 220-4000
Designed for the 3SGE Beams engine
Suitable applications:
1998-2001 Toyota Altezza (XE10)
Lexus IS200 (GXE10)
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
ECU includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
Check the additional info for I/O expansion options
SKU 222-4000
Designed for the 3SGTE engine in the models specified below.
Suitable applications:
Toyota MR2 1993 onwards (Gen3 3SGTE) not including RedTop Beams
Celica ST205
Carlos Sainz Edition
GT-Four RC
Group A Rallye
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Please check your pinoutconnector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
ECU does not fit in the original housing of non-turbo cars
Most factory features are supported.
Check the additional info for I/O expansion options.
This ECU will need a modification before E-Throttle is usable.
SKU 221-4000
Designed for the 3SGTEengine in the models specified below.
Suitable applications:
Toyota MR2 (SW20) from 1989 to 1992
Toyota Celica ST185 (except the GT-Four RC/Carlos Sainz Special Edition which is compatible with the Link TST205X Plugin)
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.Designed for the 3SGTE engine in the models specified below.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
A Link Air Temp Sensor is highly recommended with this ECU
Most factory features are supported.
Check the features tab for I/O expansion options.
This ECU will need a modification before E-Throttle is usable.
SKU 235-4000
Suitable applications:
Toyota JZX90 (Chaser/Cresta/Mark II) with 1JZ-GTE (Non-VVTi) engine, Manual Transmission
Toyota JZZ30 (Soarer) with 1JZ-GTE (Non-VVTi) engine, Manual Transmission
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the 1JZ-GTE (Non-VVTi) engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
ECU includes an onboard 7 bar MAP sensor.
Most factory features are supported (Factory traction control not supported, dash light may be illuminated). Check the features tab for I/O expansion options
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
SKU 211-4000
Suitable applications:
Toyota Supra 2JZ non VVTi
This ECU will support naturally aspirated, parallel twin or single turbo configurations. Does not support sequential control of the stock twin turbos (note: does not fit case of the NA supra)
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the 2JZ non VVTi engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
No onboard MAP sensor.
XS Loom & map sensor highly recommended.
Most factory features are supported.
Check the features tab for I/O expansion options
SKU 217-4100
Designed for the SR20 engine. This ECU will work with the 64 pin, blue header plug ECU version.
DOUBLE CHECK PINOUT
Suitable Applications:
S13 Silvia / 180SX SR20DET (but not CA18DET)
S14a Silvia (facelift) SR20DET
S15 Silvia SR20DET
S15 Silvia SR20DE
RNN14 Pulsar GTI-R SR20DET
N15 Pulsar SR16VE
N14 Distributed
*For the 76 pin header ECU, have a look at the S13X PlugIn listing.
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
Click hereto download the user manual.
SKU 213-4000
Suitable applications:
Z32 300ZX VG30DE
Z32 300ZX VG30DETT
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
The N300X ECU is Designed to suit the VG30DET engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
Includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
It is highly recommended to fit an IAT sensor with this model.
Check the features tab for I/O expansion options.
This ECU will need a modification before E-Throttle is usable.
SKU 216-4000
Designed for the SR20 and CA18 engines, that use the 76 pin Blue ECU Header.
DOUBLE CHECK PINOUT
Suitable applications:
Nissan S13 CA18DET
Nissan 180SX CA18DET
Nissan S14 (pre facelift) SR20DET
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the SR20 and CA18 engines, that use the 76 pin Blue ECU Header.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
It includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
Check the features tab for I/O expansion options.
This ECU will need a modification before E-Throttle is usable.
SKU 210-4000
The N350X ECU is Designed to suit the VQ35DE engine.
Suitable applications:
2002 to 2006 Nissan 350Z (Fairlady Z Z33)
2003 to 2006 Nissan Skyline V35
2003 to 2006 Infinity G35
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU comes in its own enclosure, while installation is a breeze with no alteration of the factory wiring loom required for the models listed below.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works with manual AND automatic transmissions.
ECU includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
Check the Additional Info for I/O expansion options
Highly recommended to fit an IAT sensor.
SKU 215-4000
Suitable applications:
RB20DE NEO, RB25DE NEO and RB25DET NEO in R34 Skylines
RB20DE NEO, RB25DE NEO and RB25DET NEO in C35 Laurels
RB20DE NEO, RB25DE NEO and RB25DET NEO in Nissan Stageas
- Plus, non neo motors in Stageas
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
The NGTTX is Designed to suit the grey plug RB (typically neo) engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
Most factory features are supported.
Note: This ECU does not currently output the 4WD signal required for proper 4wd operation in 4WD Stageas and Skylines.
Note: Models fitted with factory traction control - TCS will no longer function, the TCS and slip lamps will be illuminated.
Check the features tab for I/O expansion options.
This ECU will need a modification before E-Throttle is usable.
SKU 214-4100
Suitable applications
RB26DETT engines found in R32, R33, R34 Skyline GTRs and Autech 260RS Stageas
RB20DE engines found in R32 & R33 Skylines, A31 Cefiros
RB20DET engines found in R32 Skylines (incl 4wd), A31 Cefiros and C33 Laurels. – Injector 4&6 need swapping
RB25DE engines found in R32 & R33 Skylines, C33 & C34 Laurels and A31 Cefiros.
RB25DET engines found in R33 Skylines (incl 4wd) and C34 Laurels
RB30DE/DET/DETT engines made using Non Neo heads and blue plug looms
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.
The NGTRX is Designed to suit the blue plug Nissan RB engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
This model includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
This ECU includes support for E-Throttle (Drive-by-Wire)
Now with 4 pin powered CAN connector (See note below).
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
No results found
No results match your search. Try removing a few filters.
Special Order Parts
Parts Available but will need sales representative assistance.
Special shipping/part fitment
Click HERE or on any image to request a quote for any part you do not see on the website.
We will be adding more parts to the website daily so check back for new inventory.