Discount applied at checkout
Shop
Shop
- Sleeper Parts |
- Universal Parts |
- Link ECU |
- Tomei |
- By Vehicle |
- By Engine |
Filters
153-9300B
Alongside the G5 Voodoo Pro, the bundle includes 2.5 m A and B looms, an E connector plug and pin kit, two Bosch LSU 4.9 wideband Lambda sensors, a Link 4 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
With dual onboard Digital Wideband Lambda Control, both LSU 4.9 sensors wire straight into the ECU, giving you fast and accurate live Lambda from both sensors with no external controllers needed. The MAP and IAT sensors each come with their Deutsch DTM connector kit, and the LSU 4.9 sensors come with their plug and pin kits. The 4 bar MAP sensor suits turbo or supercharged engines running up to 3.0 bar (44 psi) of boost.
Advanced communications include GPS, Wi-Fi, Ethernet, dual CAN Bus and USB-C tuning, alongside 1GB of onboard data logging for high-speed data capture and analysis. The G5 Voodoo Pro also features automatic transmission control and dual H-bridges for E-Throttle and low power E-Wastegate control.
The G5 Voodoo Pro is the ideal solution for modern high-performance street and motorsport builds requiring maximum I/O, dual Lambda control and the full capability of Link next-generation of engine management technology.
Models Supported
The G5 Voodoo Pro can run: 12 cylinders sequential port or direct injection and direct spark, or 8 cylinders with direct/port staged injection, and direct spark.
111-9300B
Alongside the AtomX, the bundle includes a 2.5 m A loom, a CAN Lambda wideband controller with a Bosch LSU 4.9 sensor, a Link 1.15 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
The CAN Lambda is essential for modern tuning, giving you fast and accurate live Lambda without using up any DI or An Volt inputs. Each sensor comes with its Deutsch DTM connector kit, and the 1.15 bar MAP sensor gives high resolution readings on naturally aspirated engines.
As Link entry-level ECU, the AtomX delivers proven performance in a compact and capable package with exceptional value.
127-9300B
Alongside the MonsoonX, the bundle includes a 2.5 m A loom, a CAN Lambda wideband controller with a Bosch LSU 4.9 sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
The CAN Lambda is essential for modern tuning, giving you fast and accurate live Lambda without using up any DI or An Volt inputs. Each sensor comes with its Deutsch DTM connector kit, and the MonsoonX built-in MAP sensor completes the core sensor set.
Bridging the gap between the entry and mid-level ECUs, the MonsoonX delivers advanced tuning and motorsport features in a compact and capable package.
The MonsoonX is the ideal solution for naturally aspirated and turbocharged engines that require some of the advanced tuning and motorsport features, without needing to step up to one of Link higher-level ECUs.
Models Supported
The MonsoonX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark.
127-9800B
G4X Monsoon Wire-In Bundle. Everything you need to get started wiring a Link G4X MonsoonX ECU into your chosen vehicle.Â
This package is ideal for four cylinder engines requiring a few additional features.
Medium A Loom - 2.5m length A loom for G4X ECUs (MonsoonX)
Air temperature sensor
Coolant temperature sensor
Pressure sensor
108-9300B
Alongside the StormX, the bundle includes 2.5 m A and B looms, a CAN Lambda wideband controller with a Bosch LSU 4.9 sensor, a Link 4 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
The CAN Lambda is essential for modern tuning, giving you fast and accurate live Lambda without using up any DI or An Volt inputs. Each sensor comes with its Deutsch DTM connector kit, and the 4 bar MAP sensor suits turbo or supercharged engines running up to 3.0 bar (44 psi) of boost.
Positioned between Link entry-level and premium G4X ECUs, the StormX delivers performance, flexibility and value.The StormX is the ideal solution for builds requiring expanded I/O and some advanced tuning capability, without needing the extra features that come with our premium ECUs.
Models Supported
The StormX can control up to 4 rotors or 8 cylinders with sequential injection and direct spark.
109-9300B
Alongside the XtremeX, the bundle includes 2.5 m A and B looms, a CAN Lambda wideband controller with a Bosch LSU 4.9 sensor, a Link 4 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
The CAN Lambda is essential for modern tuning, giving you fast and accurate live Lambda without using up any DI or An Volt inputs. Each sensor comes with its Deutsch DTM connector kit, and the 4 bar MAP sensor suits turbo or supercharged engines running up to 3.0 bar (44 psi) of boost.
A premium G4X ECU for up to 8 cylinders, the XtremeX delivers extensive I/O, E-Throttle control and the full suite of G4X motorsport features for demanding performance and race applications.
Models Supported
The XtremeX can control up to 4 rotors or 8 cylinders with sequential injection and direct spark.
122-9300B
Alongside the FuryX, the bundle includes 2.5 m A and B looms, a Bosch LSU 4.9 wideband Lambda sensor, a Link 4 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
With the FuryX onboard Digital Wideband Lambda Control, the LSU 4.9 wires straight into the ECU, giving you fast and accurate live Lambda with no external controller needed. The MAP and IAT sensors each come with their Deutsch DTM connector kit, and the LSU 4.9 comes with its plug and pin kit. The 4 bar MAP sensor suits turbo or supercharged engines running up to 3.0 bar (44 psi) of boost.
The FuryX is the ideal solution for high-performance street and motorsport builds that demand flexibility, onboard Wideband Lambda, E-throttle control, extensive I/O and the advanced features of a premium G4X ECU.
Models Supported
The FuryX can control up to 3 rotors or 6 cylinders with sequential injection and direct spark.
122-9800B
G4X Fury Motorsport Bundle. Everything you need to get started wiring a Link G4X FuryX into your chosen beast!
This is the ideal package for engines with up to six cylinders and wanting to run onboard digital wideband lambda control.
G4X FuryX - A premium ECU with Onboard Digital Wideband.
A loom medium - 2.5 m long 'A' loom to suit G4X (FuryX)
B loom medium - 2.5 m long 'B' loom to suit G4X (FuryX)
Air Temperature Sensor
Coolant Temperature Sensor
Pressure sensor - for oil or fuel pressure up to 10 bar
Combined pressure and temperature sensor
156-9300B
Alongside the G5 Voodoo Neo 6, the bundle includes 2.5 m A and B looms, a Bosch LSU 4.9 wideband Lambda sensor, a Link 4 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
With the Neo 6 onboard Digital Wideband Lambda Control, the LSU 4.9 wires straight into the ECU, giving you fast and accurate live Lambda with no external controller needed. The MAP and IAT sensors each come with their Deutsch DTM connector kit, and the LSU 4.9 comes with its plug and pin kit. The 4 bar MAP sensor suits turbo or supercharged engines running up to 3.0 bar (44 psi) of boost.
Compatibility
The G5 Voodoo Neo 6 can run: 8 cylinders sequential port or direct injection and direct spark, or 6 cylinders with direct/port staged injection, and direct spark.
The G5 Voodoo Neo 6 is ideal for modern high-performance 6 or 8 cylinder builds requiring the next-generation of engine management technology.
154-9300B
Alongside the G5 Voodoo Neo 4, the bundle includes 2.5 m A and B looms, a Bosch LSU 4.9 wideband Lambda sensor, a Link 4 bar MAP sensor and an intake air temperature (IAT) sensor with a 1/8" NPT thread.
With the Neo 4 onboard Digital Wideband Lambda Control, the LSU 4.9 wires straight into the ECU, giving you fast and accurate live Lambda with no external controller needed. The MAP and IAT sensors each come with their Deutsch DTM connector kit, and the LSU 4.9 comes with its plug and pin kit. The 4 bar MAP sensor suits turbo or supercharged engines running up to 3.0 bar (44 psi) of boost.
Models Supported
The G5 Voodoo Neo 4 can run: 6 cylinders sequential port or direct injection and direct spark, or 4 cylinders with direct/port staged injection, and direct spark.
TA302A-TY03A
Engine: TOYOTA 1JZ-GTE, TOYOTA 2JZ-GTE
Model: TOYOTA 80 SUPRA, TOYOTA 100 CHASER, TOYOTA 100 MARK2
TB6080-NS05A
TI Exhaust front pipe made for the GT-R BNR32 / BCNR33 / BNR34 /
Cars equipped with RB26DETT engine
TB205A-NS08A
Engine: NISSAN SR20DE, NISSAN SR20DET
Model: NISSAN 13 SILVIA, NISSAN 14 SILVIA, NISSAN 15 SILVIA, NISSAN 180SX
For Drifting, circuit running and drag racing the higher G forces ( vertical and horizontal) will cause bad oil circulation due to the oil pickup not having adequate access to oil during cornering forces. This can cause engine failure if the lack of oil is a constant problem.
Horsepower: 350-725 Displacement: 2L - 3.5L
New compressor aero technology increases power and performance.
• Direct upgrade path for Gen I customers with just a CHRA purchase.
• G-Series II utilizes Gen I compressor and turbine housings.
• Up to 10% higher compressor flow compared to G-Series Gen I at peak pressure ratio and peak turbo RPM.
• Calibration required to take advantage of increased flow for a horsepower upgrade.
• Increased efficiency at high flow rates.
• Standard and reverse rotation configurations in Supercore, CHRA, and Turbo models.
• Mar-M alloy turbine wheel rated up to 1050° C.
• Stainless steel turbine housings are rated up to 1050° C.
• Oil restrictor and water fittings included.
TB203A-NS05A
Engine: NISSAN RB26DETT, NISSAN RB25DE, NISSAN RB25DET, NISSAN RB20DE, NISSAN RB20DET, NISSAN RB25DE NEO6, NISSAN RB25DET NEO6
Model: NISSAN 32 GT-R, NISSAN 33 GT-R, NISSAN 34 GT-R, NISSAN 32 SKYLINE, NISSAN 33 SKYLINE, NISSAN 34 SKYLINE
Horsepower: 475 - 825 Displacement: 2.0L - 3.5L
New compressor aero technology increases power and performance.
• Direct upgrade path for Gen I customers with just a CHRA purchase.
• G-Series II utilizes Gen I compressor and turbine housings.
• Up to 10% higher compressor flow compared to G-Series Gen I at peak pressure ratio and peak turbo RPM.
• Calibration required to take advantage of increased flow for a horsepower upgrade.
• Increased efficiency at high flow rates.
• Standard and reverse rotation configurations in Supercore, CHRA, and Turbo models.
• Mar-M alloy turbine wheel rated up to 1050° C.
• Stainless steel turbine housings are rated up to 1050° C.
• Oil restrictor and water fittings included.
G-Series II is a direct upgrade path for Gen I customers with just a CHRA purchase because the compressor housings have the same contour. This allows existing Gen I customers to use their compressor cover when upgrading.
A one-piece center housing and backplate increase durability and product safety by reducing the number of failure points associated with the turbocharger. The center housing to turbine housing V-Band connection allows for 360 degree orientation when installing with Garrett non-wastegated turbine housings.
Horsepower: 550 - 990 Displacement: 2.0L - 5.5L
• New compressor aero technology increases power and performance.
• Direct upgrade path for Gen I customers with just a CHRA purchase. (see options below)
• G-Series II utilizes Gen I compressor and turbine housings.
• Up to 10% higher compressor flow compared to G-Series Gen I at peak pressure ratio and peak turbo RPM.
• Calibration required to take advantage of increased flow for a horsepower upgrade.
• Increased efficiency at high flow rates.
• Standard and reverse rotation configurations in Supercore, CHRA, and Turbo models.
• Mar-M alloy turbine wheel rated up to 1050° C.
• Stainless steel turbine housings are rated up to 1050° C.
• Oil restrictor and water fittings included.
Compressor
Inducer: 62mm; Exducer: 76mm; Trim: 65; A/R: .72
Turbine
Inducer: 68mm; Exducer: 62mm; Trim: 68
Horsepower: 350-700 Displacement: 1.4L - 3.0L
• New compressor aero technology increases power and performance.
• Direct upgrade path for Gen I customers with just a CHRA purchase.
• G-Series II utilizes Gen I compressor and turbine housings.
• Up to 10% higher compressor flow compared to G-Series Gen I at peak pressure ratio and peak turbo RPM.
• Calibration required to take advantage of increased flow for a horsepower upgrade.
• Increased efficiency at high flow rates.
• Standard and reverse rotation configurations in Supercore, CHRA, and Turbo models.
• Mar-M alloy turbine wheel rated up to 1050° C.
• Stainless steel turbine housings are rated up to 1050° C.
• Oil restrictor and water fittings included.
Horsepower: 300 - 585 Displacement: 1.4L - 3.0L
G-SERIES II UNIVERSAL PERFORMANCE TURBOCHARGER
G25-585 | 49mm Turbine
New compressor aero increases power and performance.
Up to 10% higher compressor flow compared to G-Series Gen I at peak pressure ratio and peak turbo RPM.
Direct upgrade path for Gen I customers with just a CHRA swap.
Utilizes Gen I compressor and turbine housings.
Standard and reverse rotation configurations.
Turbine wheel constructed of Mar-M alloy rated up to 1050°C.
Oil restrictor and water fittings included.
Competitor Frame Size Reference: 4849 (48mm compressor inducer / 49mm turbine exducer)
SKU 144-5000
Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost effective and integrated solution, designed to give you full control of most modern solenoid type direct injectors and high-pressure fuel pumps.
Each DI Driver-4 module can allow up to four high voltage peak and hold solenoid Direct Injectors and one high pressure peak and hold Fuel Pump to flow up to their maximum amount of fuel at a very high engine RPM.
When combined with a G5 Voodoo Pro ECU, up to three DI Driver-4 modules can be connected together to control up to 12 Direct Injectors and two independent High Pressure Fuel Pumps. Together the G5 Voodoo Pro ECU and DI Driver-4 modules can control both Direct Injection and staged Port Injection on a single tune, giving you the ultimate all-in-one solution to achieve greater power and efficiency.
Connecting to your ECU and other DI Driver-4 modules is easy thanks to CAN Bus compatibility. Set-up has been simplified with our easy-to-use free DI Link software, which is highly user configurable over USB.
Housed in a durable, sealed CNC enclosure with a waterproof Superseal automotive connector, it’s engineered to withstand demanding conditions.
All this is backed by the industry-leading reliability and support you’ve come to expect from LinkECU.
Features
Four Direct Injection Injector Drives
• One High Pressure Fuel Pump Drive
• Water Resistant, -40 to 80 °C Operating Temperature
• 1 x CAN bus with software configurable termination
• 1 x USB Type-C for configuration via DI Link software (free download, Windows only)
• Sealed CNC billet aluminium enclosure
• 26-Way waterproof Superseal automotive connector
• Uses the Super Seal D plug
• Compatible with a wide range of engine management systems, and solenoid direct injectors. (Does not support Piezo Direct Injectors)
• Max Boost Current: 17.9A, Max Boost Voltage: 65V
• Max Peak Current: 17.9A, Max Peak Duration: 2000uS
• Max Hold Current: 5.0A, Max Hold Curation: 164mS
• Max engine RPM running a Bosch HDEV: 14,200RPM
SKU 156-5000
The next generation of engine management for many more engines.
The G5 Voodoo Neo 6 can run:
8 cylinders with port or direct injection and direct spark,
6 cylinders with direct/port staged injection and direct spark
The G5 Voodoo processing units are the perfect choice for professional-level motorsport.
Inputs/Outputs
Control up to 8 cylinders with port or direct injection and direct spark, or 6 cylinders with direct/port staged injection, thanks to:
12 injector pins
8 ignition pins
6 aux. output pins
(4 injector pins are shared with 4 DI Pins. You can only use each pin for either Injection or DI, not both at the same time.)
6 ADIO pins
Highly customisable IO, using 2 types of multi purpose pins: ADIO pins and Injector/Digital-Input pins. These pins can act as inputs or outputs.
ADIO are a unique pin type. ADIO can act as an Aux Output (switched or PWM), as an Analogue Input, or as a Digital Input, but cannot read PWM/frequency.
Neo 6 has Inj/DI pins which are used as either an injector pin, Aux or a Digital Input pin. They can read PWM/frequency.
Any unused injector/ignition pins can be used as an auxiliary pin.
All ignition and auxiliary pins are back feed protected.
3 analog inputs
10 digital inputs
4 temperature inputs
2 knock inputs
2 trigger inputs
1 x wideband lambda controller
Dual H-Bridge e-throttle control
Dedicated ignition switch pin
5v sensor supply
CAN 1 via Weipu connector. CAN connector now supplies power and ground.
Communications
USB-C (cable included)
Power over USB
WiFi: Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (antenna included)
CAN: New WEIPU connector supplies power for CAN devices
Ethernet: Built in ethernet which can function like USB. Also adds the ability to connect to the ECU over a network.
GPS: Functional when GPS antenna connected (antenna included)
Data Logging
1gb logging capacity, over WiFi, 100kHz max. total logging rate, 250 logging channels
The compressor housing features a fully machined ported shroud to help reduce compressor surge. A fully machined speed sensor port provides enthusiasts the option to add the new G Series speed sensor to measure turbocharger shaft speed, a key factor in determining ideal operating conditions.
The new speed sensor is easy to install and does not need to be adjusted for length like previous sensors. Simply remove and plug, then insert the speed sensor and tighten the bolt. The new speed sensor is sold separately and is not compatible with GT and GTX sensors due to the new design and sizing.
The addition of an o-ring between the compressor housing and backplate reduces the possibility of boost pressure leakage.
*G Series speed sensor kits have new part numbers and are not compatible with GT/GTX kits.
Part numbers (choose accordingly)
G Series \ GTX55 Gen II \ GTX50 Gen II \ GTX47 Gen II -
781328-0003 (Street) 781328-0004 (Pro)
(Older models) GTX Gen II \ GTX \ GT \ GTW -
781328-0001 (Street) 781328-0002 (Pro)
SKU 154-5000
The next generation of engine management for many more engines.
The G5 Voodoo Neo 4 can run:
6 cylinders port or direct injection and direct spark, or,
4 cylinders with direct/port staged injection, and direct spark
The G5 Voodoo processing units are the perfect choice for professional level motorsport.
Inputs/Outputs
Control up to 6 cylinders with port or direct injection and direct spark, or 4 cylinders with direct/port staged injection, thanks to:
8 injector pins
6 ignition pins
12 aux. output pins
(4 Aux pins are shared with 4 DI Pins. You can only use each pin for either Injection or DI, not both at the same time.)
6 ADIO pins
Highly customisable IO, using 2 types of multi purpose pins: ADIO pins and Aux./Digital-Input pins. These pins can act as inputs or outputs.
ADIO are a unique pin type. ADIO can act as an Aux Output (switched or PWM), as an Analogue Input, or as a Digital Input, but cannot read PWM/frequency.
Neo 4 has Aux/DI pins which are used as either an Aux pin, or a Digital Input pin. They can read PWM/frequency.
Any unused injector/ignition pins can be used as an auxiliary pin
All ignition and auxiliary pins are back feed protected.
3 analog inputs
10 digital inputs
4 temperature inputs
2 knock inputs
2 trigger inputs
1 x wideband lambda controller
Dual H-Bridge e-throttle control
Dedicated ignition switch pin
5v sensor supply
CAN 1 via Weipu connector. CAN connector now supplies power and ground.
Communications
USB-C (cable included)
Power over USB
WiFi: Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (antenna included)
CAN: New WEIPU connector supplies power for CAN devices
Ethernet: Built in ethernet which can function like USB. Also adds the ability to connect to the ECU over a network.
GPS: Functional when GPS antenna connected (antenna included)
The most powerful small frame turbocharger series on the market
Horsepower: 475-770 Displacement: 2.0L - 3.5L
G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP
58mm TURBOCHARGER COMPRESSOR WHEEL
76% MAXIMUM COMPRESSOR EFFICIENCY
MAR-M ALLOY TURBINE WHEEL RATED UP TO 1050° C
NEW TURBINE AERO PROVIDES HIGHER FLOW AND EFFICIENCY
STAINLESS STEEL TURBINE HOUSINGS RATED UP TO 1050° C
OIL RESTRICTOR AND WATER FITTINGS INCLUDED
FULLY MACHINED SPEED SENSOR AND PRESSURE PORTS
Read About Turbo System Optimization: A guide to setting up your turbocharger
Compressor Inducer 58mm, Exducer 71mm, Trim 65, A/R 0.72
Turbine Inducer 60mm, Exducer 55mm, Trim 84
SPEED SENSOR The compressor housing features a fully machined ported shroud to help reduce compressor surge. A fully machined speed sensor port provides enthusiasts the option to add the new G Series speed sensor to measure turbocharger shaft speed, a key factor in determining ideal operating conditions.
The new speed sensor is easy to install and does not need to be adjusted for length like previous sensors. Simply remove and plug, then insert the speed sensor and tighten the bolt. The new speed sensor is sold separately and is not compatible with GT and GTX sensors due to the new design and sizing.
The addition of an o-ring between the compressor housing and backplate reduces the possibility of boost pressure leakage.
*G Series speed sensor kits have new part numbers and are not compatible with GT/GTX kits. sold separately
Horsepower: 550 - 900 Displacement: 2.0L - 3.5L
G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP
62mm TURBOCHARGER COMPRESSOR WHEEL
77% MAXIMUM COMPRESSOR EFFICIENCY
MAR-M ALLOY TURBINE WHEEL RATED UP TO 1050° C
NEW TURBINE AERO PROVIDES HIGHER FLOW AND EFFICIENCY
STAINLESS STEEL TURBINE HOUSINGS RATED UP TO 1050° C
OIL RESTRICTOR AND WATER FITTINGS INCLUDED
FULLY MACHINED SPEED SENSOR AND PRESSURE PORTS
Compressor Inducer 62mm, Exducer 76mm, Trim 65, A/R 0.72
Turbine Inducer 60mm, Exducer 55mm, Trim 84
SPEED SENSOR The compressor housing features a fully machined ported shroud to help reduce compressor surge. A fully machined speed sensor port provides enthusiasts the option to add the new G Series speed sensor to measure turbocharger shaft speed, a key factor in determining ideal operating conditions.
The new speed sensor is easy to install and does not need to be adjusted for length like previous sensors. Simply remove and plug, then insert the speed sensor and tighten the bolt. The new speed sensor is sold separately and is not compatible with GT and GTX sensors due to the new design and sizing.
The addition of an o-ring between the compressor housing and backplate reduces the possibility of boost pressure leakage.
*G Series speed sensor kits have new part numbers and are not compatible with GT/GTX kits. sold separately
Horsepower: 550 - 900 Displacement: 2.0L - 5.5L
Product Line: G-Series
Frame Size: 35
Rotation: Standard and Reverse
Cooling: Oil & Water Cooled
Wastegate: External or Internal
Bearing: Ceramic Dual Ball Bearing
Turbine Wheel Specs
Turbine Inducer (mm): 68
Turbine Exducer (mm): 62
Turbine Trim :84
Turbine Wheel Mat: Mar-M
Compressor Wheel Specs
Compressor Exducer (mm): 76
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: 0.72
HP: 700-1050 Disp: 2.0L-5.5L
Product Line: G-Series
Frame Size : 35
Rotation: Standard
Cooling: Oil & Water Cooled
Wastegate: External
Bearing: Ceramic Dual Ball Bearing
Turbine Wheel Specs
Turbine Inducer (mm): 68
Turbine Exducer (mm): 62
Turbine Trim: 84
Compressor Wheel Specs
Compressor Exducer (mm): 84
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: 0.75
G-XRace Turbine Housing Kits
G-XRace GXR40 turbine housing kits are available in four A/R. 0.85 A/R | 0.95 A/R | 1.06 | 1.19 A/R stainless steel housings with T4 divided or V-Band turbine inlet flanges. G-XRace utilizes the same twin-scroll T4 and V-Band turbine housings as G-Series to enable an easy upgrade.
Horsepower: 500 - 1150
Displacement: 2.0L - 6.0L
Product Line G-XRace
Frame Size 40
Rotation Standard
Cooling Oil & Water Cooled
Bearing Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm) 88
Compressor Wheel Mat Forged Fully Machined
Compressor A/R 0.85
Turbine Wheel Specs
Turbine Inducer (mm) 77
Turbine Exducer (mm) 70
Turbine Trim 84
Turbine Wheel Mat Inconel
GARRETT GXR42-68
Horsepower: 650 - 1400 Displacement: 2.0L - 7.0L
Product Line: G-XRace
Frame Size: 42
Rotation: Standard
Cooling: Oil & Water Cooled
Wastegate: External
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 68
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .85
Turbine Wheel Specs
Turbine Inducer (mm): 82
Turbine Exducer (mm): 75
Turbine Trim: 84
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 650
Max HP: 1400
Min Displacement (L): 2.0
Max Displacement (L): 7.0
Run the WCF Winning GARRETT GXR45-73
Horsepower: 750 - 1550 Displacement: 2.0L - 8.0L
Product Line: G-XRace
*Optional Compressor Housing -For classes with 0.25″ map groove rule (PanAm, etc)
Frame Size: 45
Rotation: Standard
Cooling: Oil & Water Cooled
Wastegate: External
Inlet: V-band or T4
Outlet: V-band
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 102
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .85
Turbine Wheel Specs
Turbine Inducer (mm): 89
Turbine Exducer (mm): 82
Turbine Trim: 84
Turbine Wheel Mat: Inconel
GARRETT GXR42-72
Horsepower: 700-1450 Displacement: 2.0L - 7.0L
Product Line: G-XRace
Frame Size: 42
Rotation: Standard
Cooling: Oil & Water Cooled
Wastegate: External
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 102
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: 51
Turbine Wheel Specs
Turbine Inducer (mm): 82
Turbine Exducer (mm): 75
Turbine Trim: 84
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 700
Max HP: 1450
Min Displacement (L): 2.0
Max Displacement (L): 7.0
GARRETT GXR45-67
Horsepower: 725 - 1475 Displacement: 2.0L - 8.0L
Product Line: G-XRace
*Optional Compressor Housing -For classes with 0.25″ map groove rule (PanAm, etc)
Frame Size: 45
Rotation: Standard
Cooling: Oil & Water Cooled
Wastegate: External
Inlet: V-band or T4
Outlet: V-band
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 102
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .85
Turbine Wheel Specs
Turbine Inducer (mm): 89
Turbine Exducer (mm): 82
Turbine Trim: 84
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 725
Max HP: 1475
Min Displacement (L): 2.0
Max Displacement (L): 8.0
GARRETT GXR55-88 .25" Map Groove 106MM Turbine Wheel
For Drag racing classes: LDR, X275 - 0.25″ Map Groove
Horsepower: 1000 - 2350
Displacement: 3.0L - 12.0L
G-XRace Turbine Housing Kits
G-XRace GXR55 turbine housing kits are available in multiple A/R. 1.24 A/R | 1.40 A/R stainless steel housings with V-Band turbine inlet flanges and 1.00 A/R | 1.12 A/R | 1.24 A/R | 1.40 A/R with T6 turbine inlet flanges. G-XRace utilizes the same V-Band turbine housings as G-Series to enable an easy upgrade.
Product Line: G-XRace
Frame Size: 55
Rotation: Standard
Cooling: Oil Cooled
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 133
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .88
Turbine Wheel Specs
Turbine Inducer (mm): 112
Turbine Exducer (mm): 106
Turbine Trim: 90
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 1000
Max HP: 2350
Min Displacement (L): 3.0
Max Displacement (L): 12.0
G-XRace GXR55-88 0.18″ Map Groove 103MM Turbine
G-XRace GXR55 turbine housing kits are available in two A/R. 1.24 A/R | 1.40 A/R stainless steel housings with V-Band turbine inlet flanges. G-XRace utilizes the same V-Band turbine housings as G-Series to enable an easy upgrade.
For drag racing class - X275
Horsepower: 1000 - 2350
Displacement: 3.0L - 12.0L
Product Line: G-XRace
Frame Size: 55
Rotation: Standard
Cooling: Oil Cooled
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 133
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .88
Turbine Wheel Specs
Turbine Inducer (mm): 112
Turbine Exducer (mm): 103
Turbine Trim: 86
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 1000
Max HP: 2350
Min Displacement (L): 3.0
Max Displacement (L): 12.0
GARRETT GXR55-88 .18" Map Groove 106MM Turbine Wheel
Horsepower: 1000 - 2350 Displacement: 3.0L - 12.0L
G-XRace Turbine Housing Kits
G-XRace GXR55 turbine housing kits are available in multiple A/R. 1.24 A/R | 1.40 A/R stainless steel housings with V-Band turbine inlet flanges and 1.00 A/R | 1.12 A/R | 1.24 A/R | 1.40 A/R with T6 turbine inlet flanges. G-XRace utilizes the same V-Band turbine housings as G-Series to enable an easy upgrade.
Product Line: G-XRace
Frame Size: 55
Rotation: Standard
Cooling: Oil Cooled
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 133
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .88
Turbine Wheel Specs
Turbine Inducer (mm): 112
Turbine Exducer (mm): 106
Turbine Trim: 90
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 1000
Max HP: 2350
Min Displacement (L): 3.0
Max Displacement (L): 12.0
G-XRace GXR55-88 0.25″ Map Groove 103MM Turbine
G-XRace GXR55 turbine housing kits are available in two A/R. 1.24 A/R | 1.40 A/R stainless steel housings with V-Band turbine inlet flanges. G-XRace utilizes the same V-Band turbine housings as G-Series to enable an easy upgrade.
For drag racing classes - LDR, X275
Horsepower: 1000 - 2350
Displacement: 3.0L - 12.0L
Product Line: G-XRace
Frame Size: 55
Rotation: Standard
Cooling: Oil Cooled
Bearing: Ceramic Dual Ball Bearing
Compressor Wheel Specs
Compressor Exducer (mm): 133
Compressor Wheel Mat: Forged Fully Machined
Compressor A/R: .88
Turbine Wheel Specs
Turbine Inducer (mm): 112
Turbine Exducer (mm): 103
Turbine Trim: 86
Turbine Wheel Mat: Inconel
Engine Characteristics
Min HP: 1000
Max HP: 2350
Min Displacement (L): 3.0
Max Displacement (L): 12.0
Parts #: TA302A-NS08A
EngineNISSAN SR20DE, NISSAN SR20DET
Model: NISSAN 13 SILVIA, NISSAN 14 SILVIA, NISSAN 15 SILVIA, NISSAN 180SX
■ Super Lightweight DuraluminDuralumin was chosen for its lightweight properties and extra strength and durability. Both the outer and inner part is made from Duralumin to ensure that the product is the strongest available on the market
.■ Precision & PerfectionThe pulley and inner plate are made from billet aluminum. The pulley gear part has been designed and manufactured from precision methods to guarantee reliability with securing the drive from the timing belt.
■ Application Specific Design.The Intake and Exhaust cam pulley have been designed and manufactured individually so as when the pulley comes to the top it is easier to adjust the timing from TDC. (model specific)
■ Ultra Durable.The hard anodized surface coating greatly increases the durability of the pulley. The added strength will allow the pulley to guarantee reliability for drag racing cars that are running monster power engines that exceed 1,000 HP and used with engine speeds in excess of 10,000 RPM.
■ Performance Use & Showroom FinishThe Duralumin material with the hard anodized surface treatment gives it better operational reliability and will enhance the look of your engine bay for that showroom finish.
■ Simple Scales for AdjustmentsA simple scale was designed to help aid tuners anywhere are able to setup the settings on the scale to aid with easy setup process.
Procam SR20DET 272-12.50
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
Engine: NISSAN SR20DET
Model: NISSAN 14 SILVIA, NISSAN 15 SILVIA, NISSAN 180SX,NISSAN 13 SILVIA
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
Engine: NISSAN SR20DET
Model: NISSAN 13 SILVIA, NISSAN 180SX
PART #: TA302C-NS05A
Exhaust Cam Gear
ENGINE: NISSAN RB26DETT, RB25DE(T), RB25DE(T) NEO, RB20DE(T)
MODEL: NISSAN 32/33/34 GT-R, NISSAN 32/33/34 SKYLINE
■ Super Lightweight DuraluminDuralumin was chosen for its lightweight properties and extra strength and durability. Both the outer and inner part is made from Duralumin to ensure that the product is the strongest available on the market.
■ Precision & PerfectionThe pulley and inner plate are made from billet aluminum. The pulley gear part has been designed and manufactured from precision methods to guarantee reliability with securing the drive from the timing belt.
■ Application Specific Design.The Intake and Exhaust cam pulley have been designed and manufactured individually so as when the pulley comes to the top it is easier to adjust the timing from TDC. (model specific)
■ Ultra Durable.The hard anodized surface coating greatly increases the durability of the pulley. The added strength will allow the pulley to guarantee reliability for drag racing cars that are running monster power engines that exceed 1,000 HP and used with engine speeds in excess of 10,000 RPM.
■ Performance Use & Showroom FinishThe Duralumin material with the hard anodized surface treatment gives it better operational reliability and will enhance the look of your engine bay for that showroom finish.
■ Simple Scales for AdjustmentsA simple scale was designed to help aid tuners anywhere are able to setup the settings on the scale to aid with easy setup process.
Part # TA302B-NS05A
Intake Cam Gear
Engines: NISSAN RB26DETT, RB25DE(T) RB20DE(T), RB25DE(T) NEO
Models: NISSAN 32 GT-R, 33 GT-R, 34 GT-R, NISSAN 32 SKYLINE, 33, 34 SKYLINE
■ Super Lightweight DuraluminDuralumin was chosen for its lightweight properties and extra strength and durability. Both the outer and inner part is made from Duralumin to ensure that the product is the strongest available on the market.
■ Precision & PerfectionThe pulley and inner plate are made from billet aluminum. The pulley gear part has been designed and manufactured from precision methods to guarantee reliability with securing the drive from the timing belt.
■ Application Specific Design.The Intake and Exhaust cam pulley have been designed and manufactured individually so as when the pulley comes to the top it is easier to adjust the timing from TDC. (model specific)
■ Ultra Durable.The hard anodized surface coating greatly increases the durability of the pulley. The added strength will allow the pulley to guarantee reliability for drag racing cars that are running monster power engines that exceed 1,000 HP and used with engine speeds in excess of 10,000 RPM.
■ Performance Use & Showroom FinishThe Duralumin material with the hard anodized surface treatment gives it better operational reliability and will enhance the look of your engine bay for that showroom finish.
■ Simple Scales for Adjustments A simple scale was designed to help aid tuners anywhere are able to setup the settings on the scale to aid with easy setup process.
Multiple Sizes see below
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 34 GT-R
Multiple Sizes see below
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 32 GT-R, NISSAN 33 GT-R
parts #TA301A-NS05B (254-9.15)
TA301A-NS05D (262-9.15)
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 34 GT-R
parts # TA301A-NS05A (254-9.15)
TA301A-NS05C (262-9.15)
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train
engine: NISSAN RB26DETT
model: NISSAN 32 GT-R, NISSAN 33 GT-R
parts # TA301A-NS06C (254-9.15)
TA301A-NS06D (262-9.15)
Drop In Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
engine: NISSAN RB25DET NEO
model: NISSAN 34 SKYLINE / R34 GT-T
parts # TA301A-NS06B
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB25DE, NISSAN RB25DET
MODEL: NISSAN 33 SKYLINE /R33 Late Model
parts #TA301A-NS06A
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
engine: NISSAN RB25DE, NISSAN RB25DET
model: NISSAN 33 SKYLINE
The TOMEI RB25DE(T) PROCAM for R33 is incompatible with Nissan OEM NVCS cam gear.
When installing the TOMEI PROCAM on an engine, please replace the OEM cam gear to TOMEI adjustable cam gear (TA302B-NS05A) for the intake side. In addition, 4 pcs of OEM cam gear bolts (13012-D420A) and a lock washer (13030-D420A) are required when installing the TOMEI PROCAM.
parts #TA301B-NS06B
Drop in Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB25DE, NISSAN RB25DET
MODEL: NISSAN 33 SKYLINE /R33 Early Model
parts #TA301B-NS06A
Drop in Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB25DE, NISSAN RB25DET
MODEL: NISSAN 33 SKYLINE /R33 Early Model
parts #TA301A-NS07A
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE:NISSAN RB20DE, NISSAN RB20DET
MODEL: R31/R32,LAUREL C34
parts #TA301B-NS07A
Drop in Cams
■Optimized 'velocity' and 'acceleration'.
■Designed for high power setups.
■Optimizes engine performance.
■Higher lift than other profiles of the duration.
■Reduced stress/wear on the valve train.
ENGINE: NISSAN RB20DE, NISSAN RB20DET
MODEL: NISSAN R31/R32,LAUREL C34
Vibrant Crankcase Breather Filter w/Chrome Cap
Vibrant's Breather Filters feature a premium 4-Ply cotton-gauze filter elements that provide significantly more airflow than a stock filter while providing excellent filtration.
Perfect for Crankcases or Catch Cans that Require Small Filters * Available in Many Sizes and Shapes
Air filter for 3/4" connections. Hose clamp included.
AEM DryFlow Air Filter
Air Filter Color: Red
Air Filter Large End Diameter: 5.75 in (146 mm)
Air Filter Material: Non-woven Synthetic
Air Filter Shape: Tapered Conical
Base Outside Diameter: 5.75 in (146 mm)
Filter Material: Non-woven Synthetic
Flange Angle: 0 degrees
Flange Inside Diameter: 4 in (102 mm)
Flange Length: 0.938 in (24 mm)
Flange Offset: 0 in (0 mm)
Flange Type: Centered
Flanges: 1
Height: 7 in (178 mm)
Top Outside Diameter: 4.75 in (121 mm)
Top Style: Rubber
Washable: Yes
AEM DryFlow Air Filter
Air Filter Color: Red
Air Filter Large End Diameter: 6 in (152 mm)
Air Filter Material: Non-woven Synthetic
Air Filter Shape: Tapered Conical
Base Outside Diameter: 6 in (152 mm)
Filter Material: Non-woven Synthetic
Flange Angle: 0 degrees
Flange Inside Diameter: 4 in (102 mm)
Flange Length: 1.438 in (37 mm)
Flange Offset: 0 in (0 mm)
Flange Type: Centered
Flanges: 1
Height: 9.188 in (233 mm)
Top Outside Diameter: 5.125 in (130 mm)
Top Style: Rubber
AEM DryFlow Air Filter
Air Filter Color: Red
Air Filter Large End Diameter: 6 in (152 mm)
Air Filter Material: Non-woven Synthetic
Air Filter Shape: Tapered Conical
Base Outside Diameter: 6 in (152 mm)
Filter Material: Non-woven Synthetic
Flange Angle: 0 degrees
Flange Inside Diameter: 3.5 in (89 mm)
Flange Length: 1.375 in (35 mm)
Flange Offset: 0 in (0 mm)
Flange Type: Centered
Flanges: 1
Height: 5.25 in (133 mm)
Shape: Tapered Conical
Top Outside Diameter: 5.125 in. (130mm)
Washable: Yes
Base Outside Diameter: 6.000 in. (152mm)
AEM DryFlow Air Filter
Air Filter Color: Red
Air Filter Large End Diameter: 6 in (152 mm)
Air Filter Material: Non-woven Synthetic
Air Filter Shape: Tapered Conical
Base Outside Diameter: 6 in (152 mm)
Filter Material: Non-woven Synthetic
Flange Angle: 0 degrees
Flange Inside Diameter: 4 in (102 mm)
Flange Length: 1.5 in (38 mm)
Flange Offset: 0 in (0 mm)
Flange Type: Centered
Flanges: 1
Height: 5.25 in (133 mm)
Top Outside Diameter: 5.125 in (130 mm)
Top Style: Rubber
Air Filter Large End Diameter: 6.000 in. (152mm)
Machine Washable: Yes
Base Outside Diameter: 6.000 in. (152mm)
AEM DryFlow Air Filter
Air Filter Color: Red
Air Filter Large End Diameter: 6 in (152 mm)
Air Filter Material: Non-woven Synthetic
Air Filter Shape: Tapered Conical
Base Outside Diameter: 6 in (152 mm)
Filter Material: Non-woven Synthetic
Flange Angle: 0 degrees
Flange Inside Diameter: 3 in (76 mm)
Flange Length: 1.5 in (38 mm)
Flange Offset: 0 in (0 mm)
Flange Type: Centered
Flanges: 1
Height: 5.125 in (130 mm)
Shape: Tapered Conical
Top Outside Diameter: 5.125 in. (130mm)
Washable: Yes
Universal Installation Kit
Fits Hellcat 535lph and 450lph pumps
Kit includes : Fuel Filter/Wiring Harness/Fuel Line for E85 Pumps/hardware-clamps
Universal Fuel Pump
Description: E85 Fuel Pump
Mounting Hardware Included:NO
Fuel Type:FLEX
Diameter: 0.34375
Inlet Type: TURBINE INLET
Outlet Type: DUAL BARBED
Operating Pressure: 40
Flow Rate: 115 GAL. @ 40 PSI
Maximum Working Pressure: 110
Amperage Rating: 15.5 @ 40 PSI
Strainer Included: NO
Universal 535lph In-Tank Fuel 39/80 Flex Fuel
Available with or without check valve - without check valve offers slightly more flow
Inlet Type: TURBINE INLET
Outlet Type: DUAL BARBED
Operating Pressure: 40
Flow Rate: 125 GAL. @ 40 PSI
Maximum Working Pressure: 125
Amperage Rating: 19.0 @ 40 PSI
Strainer Included: NO
Mounting Hardware Included: NO
Diameter: 0.4375
SKU 101-0034
Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU. The sensor is fitted to the vehicle’s fuel return line anywhere between the fuel pressure regulator and the fuel tank.
AN-6 Fittings
Includes plug and pin kit
Technical Specs
The pinout is indicated on the sensor itself (from left to right looking into connector on sensor) as :
1.) Vcc (+12V supply)
2.) GND (ground)
3.) Vout (digital signal out)
Exclusively for R34’s
Designed to fit the stock ashtray location.
We have worked in conjunction with BTI Gauges to create a flush mounting solution for the 3.5” screen.
A direct swap out of the ashtray with no drilling or additional holes needed.
The BTI 3.5” screen works with numerous standalone ECU’s on the market, making this a great option for some of you Skyline owners.
Monitor your RPM, AFR, IAT, H2O, E%, Oil and Fuel pressure. Monitor and set your boost target. Choose from multiple screen layouts. Analog and CAN output, tpms, transmission, flat foot shift, launch control, anti-lag and more features.
The 2nd gen 3.5 BTI Touch Screen features 20 screens, anti-glare coating, and more processing power than ever. Designed for peak functionality with boost setting adjustments, traction settings, programmable shift light, and so much more.
Sold as one unit
assembled
Exclusively made for R32’s
Maintain your OEM plus look while monitoring all the ECU data in one simplified gauge.
We have worked in conjunction with BTI Gauges to create a flush mounting solution for the 3.5” screen.
A direct swap out of the ashtray with no drilling or additional holes needed.
The BTI 3.5” screen works with numerous standalone ECU’s on the market, making this a great option for some of you Skyline owners.
Monitor your RPM, AFR, IAT, H2O, E%, Oil and Fuel pressure. Monitor and set your boost target. Choose from multiple screen layouts. Analog and CAN output, tpms, transmission, flat foot shift, launch control, anti-lag and more features.
The 2nd gen 3.5 BTI Touch Screen features 20 screens, anti-glare coating, and more processing power than ever. Designed for peak functionality with boost setting adjustments, traction settings, programmable shift light, and so much more.
Sold as one unit
Assembled
SKU 125-1000
Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.
If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug.
Please note proper CAN protocol must be followed. See manual below for guidance.
SKU 214-4100
Suitable applications
RB26DETT engines found in R32, R33, R34 Skyline GTRs and Autech 260RS Stageas
RB20DE engines found in R32 & R33 Skylines, A31 Cefiros
RB20DET engines found in R32 Skylines (incl 4wd), A31 Cefiros and C33 Laurels. – Injector 4&6 need swapping
RB25DE engines found in R32 & R33 Skylines, C33 & C34 Laurels and A31 Cefiros.
RB25DET engines found in R33 Skylines (incl 4wd) and C34 Laurels
RB30DE/DET/DETT engines made using Non Neo heads and blue plug looms
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.
The NGTRX is Designed to suit the blue plug Nissan RB engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
This model includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
This ECU includes support for E-Throttle (Drive-by-Wire)
Now with 4 pin powered CAN connector (See note below).
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
R32 ABS Delete only
Made to order
Catch can made to fit your chassis and setup. Designed to fit the R32 chassis with ABS delete. Baffled catch can made out of aluminum and larger than most cans on the market. Catch can breathes through the slots in our logo plate. 4 Allen head bolts secure the logo plate hiding the E85 resistant foam. Making maintenance easy and accessible. Drain on the bottom for ease of service.
Powder coat options available upon request
Quality -AN fittings and lines available upon request
Available in -10AN or -12AN variations
*select from size options below
SKU 101-0164
This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor.
Includes Deutsch 3-pin connector kit
Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to.
Compact aluminium enclosure
Mechanical connection via 4mm hose connector nipple
Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 3 Bar’
SKU 152-5000
New G5 Voodoo Pro
(ECU used in our race program)
G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features.
With 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total) the G5 Voodoo Pro can run up to:
· 12 cylinders port or direct injection and direct spark, or
· 8 cylinders with direct/port staged injection and direct spark.
The supported cylinder count depends on the type and number of fuel pumps used.
For more information please see the Features and Specifications tab or view our Product Introduction page here.
The G5 Voodoo Pro works on a variety of vehicles, please contact Technical Support for advice regarding your specific project.
Click here to head to the Knowledge Base for more technical information (includes downloads for the Quick Start Guide and I/O table).
In the box: G5 Voodoo Pro ECU, USB-C Connection Cable, Wi-Fi Antenna, 4m GPS Antenna (Magnetic or Adhesive Mount), USB-C and SMA Dust Covers, QuickStart Guide (A5), Installer I/O table (A3), Mounting Screws, Link stickers
Features and Specifications
· Built-in Wi-Fi, with real-time PC Link connection
· Built-in Global Positioning System (GPS) up to 50Hz
· Built-in Ethernet, the fastest and most stable way to view or download data logs, calibrate and tune your ECU.
· Highly customisable IO, now using eight ADIO pins.
· Dual onboard LSU 4.9 digital wideband controllers.
· Dual on-board H-Bridges that support things like E-Throttle (Drive by Wire) and low power E-Wastegates.
· 1GB onboard of data logging memory.
· All G4X and G5 tunes are compatible with the G5 Voodoo Pro.
· CNC Case, Sealed enclosure
Outputs
· 12 injector drives
· 8 ignition drives
· 4 injector/ignition dual role drives
· 6 auxiliary Outputs
· +5V sensor power supply
· Any unused injector/ignition pins can be used as an auxiliary pin
· All ignition and auxiliary pins are fly back protected.
Inputs
· 10 digital inputs
· 4 temperature inputs
· 14 analogue inputs
· 2 trigger inputs
· 2 knock inputs
Input/Outputs
· 8 ADIO dual purpose pins
Communications
· USB-C (cable included)
· Connect directly to the ECU via built-in Wi-Fi Access Point, or add it to an existing network (Antenna Included)
· Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)
· GPS (antenna included)
· Ethernet with daisy chain support
Size & Weight
· Depth: 109.2 mm (4.3 inches)
· Width: 193.5 mm (7.6 inches)
· Max height: 45.0 mm (1.8 inches)
· Weight: 768g (27 ounces)
Connectivity
The G5 Voodoo Pro supports the following comms standards:
· USB-C
· Wi-Fi
· CAN
· GPS
· Ethernet
The G5 Voodoo Pro uses A, B & E Superseal headers. A & B headers are closely matched pinouts with the G4X and G5 Voodoo Neo platforms.
It is now possible to connect to your ECU using a standard USB-C cable, or alternatively by using Wi-Fi or Ethernet.
GPS connectivity can be initialised by simply adding a GPS antenna.
SKU 135-1000
Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.
The Razor PDM is a programmable device that uses logic for the smart control of any outputs you have connected, meaning events and commands can be triggered when your vehicle hits specific parameters.
The device will allow you to manage things such as fuel pumps, radiator fans, electronic throttles, servos, lights and more, as well as monitoring analog or digital sensor signals.
You can gain full control by using an Analog Switch Panel, CAN Keypad or ECU to switch output channels, as well as increasing reliability and protecting your critical components from damage.
With superior thermal performance, the Razor PDM has been designed with vehicle protection in mind, while allowing for a more efficient, cleaner, and reliable build.
It may be small and compact, but the Razor PDM can handle up to 100 Amps of continuous combined current, as well as 160A of non-repetitive maximum current. If you need to manage even more power, you can easily add multiple Razor PDM’s via CAN or use as a CAN Expander to increase your inputs and outputs.
The Razor PDM has the ability to connect with many other ECU brands and CAN devices when using a custom CAN stream. Those of you with a Link ECU will be pleased to know that our software comes with a pre-configured stream, so your Link products will work with the device straight out of the box.
Setup and management of the Razor PDM is performed through our custom PDM Link software, which is free to download and use.
In the box:
• Link Razor PDM
• Mounting plate and screws
• Superseal C Plug and Pin Kit
• USB-C connection cable
• Positive terminal insulation boot
• 2 x high-current ring terminals and bolts
• Quickstart guide
SKU 100-0170
Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.
Features:
Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving technique.
Supports more than 2000 tracks worldwide
Easy to set-up and review data using Race Studio 3
Connects to dual satellites for redundancy and precision
Simple, plug and play connection to Strada MXS & MXG Dashes
A GPS module also provides the dash with a speed signal. This can be particularly useful for applications where wheel speeds are not available or utilised, such as boats.
Specifications
Dimensions: 64.8 x 53.2 x 19.7 mm, Weight: 60.5 g
You do not need to configure anything before going to the track: GPS09 will do it all by itself.
Satellite signal is locked very rapidly. A few seconds after switch-on, the GPS09 is ready to operate
An average of less than one meter tolerance, which means absolute precision in determining vehicle position in curves and when the finish line is very close to another track segment
SKU 135-9500B
Bundle - Includes 1 x Razor PDM and 1 x 12 Button CAN Keypad.
Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.
The Razor PDM is a programmable device that uses logic for the smart control of any outputs you have connected, meaning events and commands can be triggered when your vehicle hits specific parameters.
The device will allow you to manage things such as fuel pumps, radiator fans, electronic throttles, servos, lights and more, as well as monitoring analog or digital sensor signals.
You can gain full control by using an Analog Switch Panel, CAN Keypad or ECU to switch output channels, as well as increasing reliability and protecting your critical components from damage.
With superior thermal performance, the Razor PDM has been designed with vehicle protection in mind, while allowing for a more efficient, cleaner, and reliable build.
It may be small and compact, but the Razor PDM can handle up to 100 Amps of continuous combined current, as well as 160A of non-repetitive maximum current. If you need to manage even more power, you can easily add multiple Razor PDM’s via CAN or use as a CAN Expander to increase your inputs and outputs.
The Razor PDM has the ability to connect with many other ECU brands and CAN devices when using a custom CAN stream. Those of you with a Link ECU will be pleased to know that our software comes with a pre-configured stream, so your Link products will work with the device straight out of the box.
Setup and management of the Razor PDM is performed through our custom PDM Link software, which is free to download and use.
In the box:
• Link Razor PDM
• Mounting plate and screws
• Superseal C Plug and Pin Kit
• USB-C connection cable
• Positive terminal insulation boot
• 2 x high-current ring terminals and bolts
• Quickstart guide
SKU 135-9300B
Triple Bundle - Includes 3 x Razor PDMs.
Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.
The Razor PDM is a programmable device that uses logic for the smart control of any outputs you have connected, meaning events and commands can be triggered when your vehicle hits specific parameters.
The device will allow you to manage things such as fuel pumps, radiator fans, electronic throttles, servos, lights and more, as well as monitoring analog or digital sensor signals.
You can gain full control by using an Analog Switch Panel, CAN Keypad or ECU to switch output channels, as well as increasing reliability and protecting your critical components from damage.
With superior thermal performance, the Razor PDM has been designed with vehicle protection in mind, while allowing for a more efficient, cleaner, and reliable build.
It may be small and compact, but the Razor PDM can handle up to 100 Amps of continuous combined current, as well as 160A of non-repetitive maximum current. If you need to manage even more power, you can easily add multiple Razor PDM’s via CAN or use as a CAN Expander to increase your inputs and outputs.
The Razor PDM has the ability to connect with many other ECU brands and CAN devices when using a custom CAN stream. Those of you with a Link ECU will be pleased to know that our software comes with a pre-configured stream, so your Link products will work with the device straight out of the box.
Setup and management of the Razor PDM is performed through our custom PDM Link software, which is free to download and use.
In the box:
• Link Razor PDM
• Mounting plate and screws
• Superseal C Plug and Pin Kit
• USB-C connection cable
• Positive terminal insulation boot
• 2 x high-current ring terminals and bolts
• Quickstart guide
SKU 135-9200B
Bundle - Includes 2 x Razor PDMs.
Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.
The Razor PDM is a programmable device that uses logic for the smart control of any outputs you have connected, meaning events and commands can be triggered when your vehicle hits specific parameters.
The device will allow you to manage things such as fuel pumps, radiator fans, electronic throttles, servos, lights and more, as well as monitoring analog or digital sensor signals.
You can gain full control by using an Analog Switch Panel, CAN Keypad or ECU to switch output channels, as well as increasing reliability and protecting your critical components from damage.
With superior thermal performance, the Razor PDM has been designed with vehicle protection in mind, while allowing for a more efficient, cleaner, and reliable build.
It may be small and compact, but the Razor PDM can handle up to 100 Amps of continuous combined current, as well as 160A of non-repetitive maximum current. If you need to manage even more power, you can easily add multiple Razor PDM’s via CAN or use as a CAN Expander to increase your inputs and outputs.
The Razor PDM has the ability to connect with many other ECU brands and CAN devices when using a custom CAN stream. Those of you with a Link ECU will be pleased to know that our software comes with a pre-configured stream, so your Link products will work with the device straight out of the box.
Setup and management of the Razor PDM is performed through our custom PDM Link software, which is free to download and use.
In the box:
• Link Razor PDM
• Mounting plate and screws
• Superseal C Plug and Pin Kit
• USB-C connection cable
• Positive terminal insulation boot
• 2 x high-current ring terminals and bolts
• Quickstart guide
SKU 101-0054
Donut style 8mm Knock Sensor prewired with 2.6m loom, flying leads.
Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.
PUMP FEATURES:
• Flows 340LPH @ 3bar, 13.5v (90GPH @ 45psi)
• Internal Check Valve •Maximum Pressure - 5.9 Bar (85psi)
•Can be used in carbureted and EFI applications
•Each pump is individually tested for performance and includes flow and current draw report
•Designed for in-tank use only
•Sending Unit not included
•Comes with rubber sleeve, end cap, pre-filter, hose, clamps and wire leads.
SKU 114-2000
Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.
The G4 KnockLink is the only detonation warning device on the market that requires no setup. Other systems require time consuming gain, frequency and noise settings to be adjusted. Without proper knock listening tools, this can prove difficult if not impossible. The KnockLink requires none of this, just wire in and start the engine.
Even light detonation will damage an engine over time. The G4 KnockLink's microprocessor continuously scans the knock signal and warns for any knock occurring. The engine's RPM and load is automatically 3D profiled by the KnockLink, continuously storing and dynamically adjusting this noise profile map while looking for the particular knock frequency.
Operation is simple. The colour of the LED represents four different modes:
Dim Blue - KnockLink is powered, waiting for the engine to be started
Flashing Blue - KnockLink has detected the engine has started and is now calibrating
Dim Green - KnockLink is adapting to the engine's noise profile and listening for knock
Flashing Red - KnockLink has detected knock. Avoid large throttle openings, seek professional advice
sku 101-0053
Donut style
8mm hole
Includes plug and pin kit
SKU 101-0287
Bosch Junior Timer / Jetronic (Male) to USCar (Female) Adapter
Commonly used when upgrading to fuel injectors with the newer USCar connector and your wiring loom has Bosch Junior Timer/Jetronic/EV1 connectors.
SKU 101-0288
Injector Adapter - USCar (Male) to Bosch Junior Timer/Jetronic (Female)
Fits Bosch Junior Timer/EV1/Jetronic injector and connects to USCar connector on the wiring loom.
SKU 101-0289
USCar Fuel Injector Connector Kit
Includes:
Housing
Crimp terminals
Terminal seals
Seal locating tab
Locking tab
SKU 101-0146 - 8Bundle
Extreme Duty Fast Response EGT Temperature Probe.
Bundle includes 8 x Probes.
Type K thermocouple probe
Exposed sensing junction for fastest response
Includes 316 SS adjustable compression fitting
Stainless steel protected wires
Designed for extreme engine test & racing environments