G5 Voodoo Pro - Wire in ECU

from $4,065.00

SKU 152-5000

New G5 Voodoo Pro

(ECU used in our race program)

G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features.

With 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total) the G5 Voodoo Pro can run up to:

· 12 cylinders port or direct injection and direct spark, or

· 8 cylinders with direct/port staged injection and direct spark.

The supported cylinder count depends on the type and number of fuel pumps used.

For more information please see the Features and Specifications tab or view our Product Introduction page here.


The G5 Voodoo Pro works on a variety of vehicles, please contact Technical Support for advice regarding your specific project.

Click here to head to the Knowledge Base for more technical information (includes downloads for the Quick Start Guide and I/O table).

In the box: G5 Voodoo Pro ECU, USB-C Connection Cable, Wi-Fi Antenna, 4m GPS Antenna (Magnetic or Adhesive Mount), USB-C and SMA Dust Covers, QuickStart Guide (A5), Installer I/O table (A3), Mounting Screws, Link stickers

Features and Specifications

· Built-in Wi-Fi, with real-time PC Link connection

· Built-in Global Positioning System (GPS) up to 50Hz

· Built-in Ethernet, the fastest and most stable way to view or download data logs, calibrate and tune your ECU.

· Highly customisable IO, now using eight ADIO pins.

· Dual onboard LSU 4.9 digital wideband controllers.

· Dual on-board H-Bridges that support things like E-Throttle (Drive by Wire) and low power E-Wastegates.

· 1GB onboard of data logging memory.

· All G4X and G5 tunes are compatible with the G5 Voodoo Pro.

· CNC Case, Sealed enclosure

Outputs

· 12 injector drives

· 8 ignition drives

· 4 injector/ignition dual role drives

· 6 auxiliary Outputs

· +5V sensor power supply

· Any unused injector/ignition pins can be used as an auxiliary pin

· All ignition and auxiliary pins are fly back protected.

 Inputs

· 10 digital inputs

· 4 temperature inputs

· 14 analogue inputs

· 2 trigger inputs

· 2 knock inputs

 Input/Outputs

· 8 ADIO dual purpose pins

 Communications

· USB-C (cable included)

· Connect directly to the ECU via built-in Wi-Fi Access Point, or add it to an existing network (Antenna Included)

· Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)

· GPS (antenna included)

· Ethernet with daisy chain support

 Size & Weight

· Depth: 109.2 mm (4.3 inches)

· Width: 193.5 mm (7.6 inches)

· Max height: 45.0 mm (1.8 inches)

· Weight: 768g (27 ounces)

 Connectivity

The G5 Voodoo Pro supports the following comms standards:

· USB-C

· Wi-Fi

· CAN

· GPS

· Ethernet

 The G5 Voodoo Pro uses A, B & E Superseal headers. A & B headers are closely matched pinouts with the G4X and G5 Voodoo Neo platforms.

It is now possible to connect to your ECU using a standard USB-C cable, or alternatively by using Wi-Fi or Ethernet.

GPS connectivity can be initialised by simply adding a GPS antenna.

Options:

SKU 152-5000

New G5 Voodoo Pro

(ECU used in our race program)

G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features.

With 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total) the G5 Voodoo Pro can run up to:

· 12 cylinders port or direct injection and direct spark, or

· 8 cylinders with direct/port staged injection and direct spark.

The supported cylinder count depends on the type and number of fuel pumps used.

For more information please see the Features and Specifications tab or view our Product Introduction page here.


The G5 Voodoo Pro works on a variety of vehicles, please contact Technical Support for advice regarding your specific project.

Click here to head to the Knowledge Base for more technical information (includes downloads for the Quick Start Guide and I/O table).

In the box: G5 Voodoo Pro ECU, USB-C Connection Cable, Wi-Fi Antenna, 4m GPS Antenna (Magnetic or Adhesive Mount), USB-C and SMA Dust Covers, QuickStart Guide (A5), Installer I/O table (A3), Mounting Screws, Link stickers

Features and Specifications

· Built-in Wi-Fi, with real-time PC Link connection

· Built-in Global Positioning System (GPS) up to 50Hz

· Built-in Ethernet, the fastest and most stable way to view or download data logs, calibrate and tune your ECU.

· Highly customisable IO, now using eight ADIO pins.

· Dual onboard LSU 4.9 digital wideband controllers.

· Dual on-board H-Bridges that support things like E-Throttle (Drive by Wire) and low power E-Wastegates.

· 1GB onboard of data logging memory.

· All G4X and G5 tunes are compatible with the G5 Voodoo Pro.

· CNC Case, Sealed enclosure

Outputs

· 12 injector drives

· 8 ignition drives

· 4 injector/ignition dual role drives

· 6 auxiliary Outputs

· +5V sensor power supply

· Any unused injector/ignition pins can be used as an auxiliary pin

· All ignition and auxiliary pins are fly back protected.

 Inputs

· 10 digital inputs

· 4 temperature inputs

· 14 analogue inputs

· 2 trigger inputs

· 2 knock inputs

 Input/Outputs

· 8 ADIO dual purpose pins

 Communications

· USB-C (cable included)

· Connect directly to the ECU via built-in Wi-Fi Access Point, or add it to an existing network (Antenna Included)

· Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)

· GPS (antenna included)

· Ethernet with daisy chain support

 Size & Weight

· Depth: 109.2 mm (4.3 inches)

· Width: 193.5 mm (7.6 inches)

· Max height: 45.0 mm (1.8 inches)

· Weight: 768g (27 ounces)

 Connectivity

The G5 Voodoo Pro supports the following comms standards:

· USB-C

· Wi-Fi

· CAN

· GPS

· Ethernet

 The G5 Voodoo Pro uses A, B & E Superseal headers. A & B headers are closely matched pinouts with the G4X and G5 Voodoo Neo platforms.

It is now possible to connect to your ECU using a standard USB-C cable, or alternatively by using Wi-Fi or Ethernet.

GPS connectivity can be initialised by simply adding a GPS antenna.

Link Engine Management products are not recommended where installation and tuning of such products contravenes your countries laws or interferes with the vehicle safety or pollution protection features. For track/race purposes only.

Inputs/Outputs

  • Control any engine with 2 cylinders, all the way up to 12 cylinders, thanks to:

    • 12 injector pins

    • 8 ignition pins

    • 4 injector/ignition dual role pins

  • Access up to 30 auxilary pins (when setup for a 4-cylinder sequential engine):

    • 8 dedicated auxiliary pins

    • 4 shared e-throttle/H-Bridge pins

    • 2 shared wideband heater pins

    • Up to 16 from spare injector and ignition drives

  • Any unused injector/ignition pins can be used as an auxiliary pin

  • All ignition and auxiliary pins are back feed protected.

  • 14 analog inputs

  • 10 digital inputs

  • 4 temperature inputs

  • Dual knock inputs

  • 2 trigger inputs

  • Dedicated ignition switch pin

  • 2 x internal wideband lambda controllers

  • Dual e-throttle, with internal solid state throttle disconnect relays

  • 5v sensor supply

  • CAN 1 input now supported via CAN connector

 

Communications

  • USB-C (cable included)

  • Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (Antenna Included)

  • Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)

  • GPS (antenna included)

 

Size & Weight

  • Length: 177.1mm (6.97 inches)

  • Width: 137.3mm (5.40 inches)

  • Min side height: 15.5mm (0.61 inches)

  • Max side height: 40.2mm (1.58 inches)

  • Weight: 795g (28 ounces)

 

Connectivity

The G5 Voodoo Pro supports the following comms standards:

  • USB-C

  • Wi-Fi

  • CAN

  • GPS

 

The G5 Voodoo Pro uses the Super Seal A, B & E plugs.

It is now possible to connect to your ECU using a standard USB-C cable, or alternatively by using WiFi.

You can now access CANBUS 2 via its own dedicated pins in Header E freeing up two Digital Inputs.

GPS connectivity can be initialised by simply adding a GPS antenna.

Click here for more information